Debian

Aunque el Iceweasel tiene la misma opcion que Mozilla para instalar automaticamente los componentes que necesita; te pondremos los codigos para que lo puedas instalar via Terminal.Iniciamos terminal de RootBajamos el archivo con:notycs# wget el archivo tar.gz con:notycs# tar -xvf install_flash_player_9_linux.tar.gzHemos creado el directorio "install_flash_player_9_linux" que contiene el fichero libflashplayer.soMovemos el fichero al directorio de plugins de Iceweasel o Firefox, segun sea el caso: Para Firefox:notycs# mv install_flash_player_9_linux/libflashplayer.so /usr/lib/mozilla-firefox/plugins/ Si tenemos ICEWEASEL hacemos:notycs# mv install_flash_player_9_linux/libflashplayer.so /usr/lib/iceweasel/plugins/Listo.Dato inutil: "...sabias que Francisco de Asís f

Recently I had cause to buy a scanner. Being in a reasonably small home I was eager to save on desk-space, and so decided to upgrade my ageing inkjet printer at the same time. Having looked around I eventually went for an HP Photosmart C5180 device. This is my experience of installing it on Debian Lenny .

Recently I had cause to buy a scanner. Being in a reasonably small home I was eager to save on desk-space, and so decided to upgrade my ageing inkjet printer at the same time. Having looked around I eventually went for an HP Photosmart C5180 device. This is my experience of installing it on Debian Lenny .

I’m always trying new software, and with the webserver I’ve moved from Apache 1.3 to 2.0 to 2.2, and then later I moved everything over to Lighttpd, which I’ve liked, save for some memory issues that popped up.  Now, enter a web server named nginx (engine x), written by a Russian hacker. It’s already [...]

Lo que haremos es modificar un valor conocido como swappiness..Por defecto, en la rama 2.6, el núcleo de linux tiene este valor a un 60% (en la rama 2.4 no existe). Esto quiere decir que se hará bastante uso de la memoria de intercambio (swap). Resulta útil si tenemos un servidor con gran carga de trabajo y poca RAM, o si compilamos frecuentemente aplicaciones muuuuy grandes. Sin embargo, en un sistema de escritorio, con varias aplicaciones pequeñas ejecutándose, podemos bajar este valor a 10 para que el núcleo use más a menudo la memoria RAM (más rápida) y recurra menos a la memoria de intercambio. Para ello, abrimos una terminal y hacemos lo siguiente:- Consultamos el valor inicial:sudo cat /proc/sys/vm/swappiness-Después de introducir la contraseña, nos muestra un valor de 60

Da quando ho installato Debian unstable sul mio pc di casa e debian testing sul laptop, non riuscivo più ad ascoltare i suoni di sistema di Gnome. Per intenderci, nessun suono all’avvio del computer, allo spegnimento o alla notifica dei messaggi di errore. Inizialmente non mi interessava averli. Ma oggi pomeriggio mi sono intestardito e [...]

Disini akan di jelaskan bagaimana membuat DVD repository lokal, berikut adalah tahapanya Membuat DVD repository lokal Silakan buat dulu Repository lokal anda Memecah Repository Menjadi ukuran DVD Ukuran Repository yang terlalu besar menjadi kendala bagi kite semua, apalagi yang mempunyai bandwith pas-pasan. untuk pendistribusian repository, di indonesia telah di kembangkan DVD nya, hal ini membuat kesempatan bagi kita semua [...]

Otro de los problemas que ha tenido el portátil ha sido con el sonido. De momento he dejado la configuración del micrófono digital que tiene, cuando tenga tiempo lo retomaré. De todas formas, si usas ubuntu, tienes un kernel ya preparado y configurado aquí. Advertisement: leer más

A veces pasa que el reloj, si usamos 2 sistemas operativos, se desajusta con facilidad. Hay varias formas de solucionarlo, una de ellas es usar 'ntp' para sincronizarlo pero el hecho de necesitar la conexión a internet me hace desecharlo y optar por la segunda opción. configurar reloj select() to /dev/rtc to wait for clock tick timed out entonces para solucionar esto hay una forma sencilla: hwclock --set --date="2008-01-13 08:23" --directisa Advertisement: leer más

Disini akan di jelaskan bagaimana membuat DVD repository lokal, berikut adalah tahapanya Membuat DVD repository lokal Silakan buat dulu Repository lokal anda Memecah Repository Menjadi ukuran DVD Ukuran Repository yang terlalu besar menjadi kendala bagi kite semua, apalagi yang mempunyai bandwith pas-pasan. untuk pendistribusian repository, di indonesia telah di kembangkan DVD nya, hal ini membuat kesempatan bagi kita semua [...]

Sul mio portatile ho installato da poco la distribuzione Linux Debian in versione testing (nome in codice “Lenny”). In precedenza avevo sempre utilizzato Ubuntu e non mi era mai capitato di avere la rete wireless non funzionante. Invece, su debian, per problemi di licenze a quanto pare, la mia scheda di rete wireless Intel (modello [...]

eBOOK Details Publisher Wiley Release Date February 19, 2008 ISBN 0470230193 eBOOK Description Great Content from a Bestselling Author: The Linux Bible 2008 Edition is the best first Linux book for new or migrating users. By focusing on the building-block nature of Linux, and offering true up-to-date descriptions of Linux technology, the Bible helps the reader learn how to jump headlong {This is a content summary only, visit my blog for full link, other content and more }

Come ogni anno è d’abitudine, viene eletto un candidato a Leader del progetto Debian, quest’anno il cicerone sarà: Steve McIntyre, che ricoprirà questa carica fino al 17 aprile 2009. Qui potete trovare la notizia ufficiale.

# Publisher: Wiley; 2008 edition (February 19, 2008)# Language: English# ISBN-10: 0470230193# ISBN-13: 978-0470230190Product DescriptionGreat Content from a Bestselling Author: The Linux Bible 2008 Edition is the best first Linux book for new or migrating users. By focusing on the building-block nature of Linux, and offering true up-to-date descriptions of Linux technology, the Bible helps the reader learn how to jump headlong into Linux, regardless of the Linux distribution they choose. Descriptions of different Linux distributions helps users choose the Linux distribution that's right for them. Detailed installation instructions, step-by-step descriptions of key desktop and server components, and the actual distributions on CD and DVD, let readers get started using Linux immediately. The

We have already discussed how to install mail server with postfix+Devcot+SASL +Squirrel Mail in this article we will see how to add spam filter for postfix mail server.Apache SpamAssassin is an extensible email filter that is used to identify spam. Once identified, the mail can then be optionally tagged as spam for later filtering.

We have already discussed how to install mail server with postfix+Devcot+SASL +Squirrel Mail in this article we will see how to add spam filter for postfix mail server.Apache SpamAssassin is an extensible email filter that is used to identify spam. Once identified, the mail can then be optionally tagged as spam for later filtering.

I'm always using a mix of machines and OSes for my work, but until this week, my main "home" machine -- The $0 Laptop (Gateway Solo 1450) -- has been mostly used at home for a bit of Web browsing, testing Linux distributions, and my daughter's favorite educational games (gCompris, Childsplay, TuxPaint, Potato Guy). But this week I've needed to use the laptop a lot more while I'm in the office.

I'm always using a mix of machines and OSes for my work, but until this week, my main "home" machine -- The $0 Laptop (Gateway Solo 1450) -- has been mostly used at home for a bit of Web browsing, testing Linux distributions, and my daughter's favorite educational games (gCompris, Childsplay, TuxPaint, Potato Guy). But this week I've needed to use the laptop a lot more while I'm in the office.

"The binary packages provided here have standard Debian deb format. For those who want to manually unpack such a .deb package (NOT necessary when installing Debian for Interix, of course): .deb files are normal ar archives, to unpack do the followin" Debian Interix

Steve McIntyre, inglés de 34 años y el líder del equipo de "debian-cd" que se encarga de generas los CDs y DVDs oficiales de esa distribución, fué elegido la semana pasada como el nuevo líder del proyecto Debian en transparentes elecciones que favorecieron mayoritariamente a su plataforma electoral. McIntyre, que reemplaza en su cargo a Sam Hocevar, ejercerá su nueva función por un año completo.

Vi propongo un bel tutorial sul collegamento del motorola A1000 in ambiente Debian - ubuntu. Lo trovate a quasto indirizzo: %28per_distro_debian-based%29 P.S. Scusate per la mia lunga assenza ma sono tornato.

Paul, our overworked and under appreciated CTO (who also happens to be my business partner) has been beavering away on enabling more cool stuff for the VPS hosting solutions.One of the most requested features over the past few days has been support for more linux distributions.Since there are a LOT of linux distributions we had to focus on the more important and popular ones, so Debian was pretty much top of the list.You can now order Debian VPS (without plesk) via the online shop.Rest assured that we do plan on adding more linux distributions, but as the old adage goes - Rome wasn 't built in a day, so we'd have to humbly ask you to bear with us.Of course you don't have to wait if you don't want to, but hopping up and down won't speed things up... Speaking of linux distros ... We probabl

This document describes how to set up and configure rsyncbackup on Debian Etch. Rsyncbackup is a Perl script that cooperates with rsync. It is easy to configure and able to create scheduled backups (partial and incremental backups).

Il nome in codice lo si sapeva da tempo, Lenny, il numero di versione era ancora sconosciuto, almeno fino ad ora, il team di Debian ha annunciato che la prossima release della distribuzione sarà la 5.0. Debian GNU/Linux 5.0 “Lenny”, questo il nome completo della prossima release di Debian, annunciata il 2 Marzo 2008 da Marc [...]

Il nome in codice lo si sapeva da tempo, Lenny, il numero di versione era ancora sconosciuto, almeno fino ad ora, il team di Debian ha annunciato che la prossima release della distribuzione sarà la 5.0. Debian GNU/Linux 5.0 “Lenny”, questo il nome completo della prossima release di Debian, annunciata il 2 Marzo 2008 da Marc [...]

Excelentes portadas de cds y dvds me he encontrado en Mundo Geek para los dvds o cds de Ubuntu, Knoppix y Debian. Las caratulas están diseñadas por Juan Jesús Gómez Hinestrosa (puntodepartida.com) y podemos descargarlas gratuitamente desde su web. Enlace: Carátulas de Ubuntu, Knoppix y Debian

The Linux kernel is a funny thing. A new kernel should mean increased functionality, but for me and my old-and-getting-older machines, I only seem to lose functionality with upgraded kernels. I hadn't updated Debian Lenny in a while on the $0 Laptop (the Gateway Solo 1450), and when I did it today, I noticed a new kernel being added to the system: 2.6.24-1. I didn't think about the new kernel when I next booted into Lenny, but when I did, I soon discovered that my sound card didn't work anymore. I looked at all the settings, tweaked a bit here and there, but still nothing.

I decided to start from scratch with my Debian server project. Last time I was too hasty in adding the open-source version of Movable Type to my installation and intermingling files before I was ready. This time I'm going to be a lot more methodical and make sure that Apache and MySQL are working properly -- meaning I can run CGI scripts and have a directory dedicated to same -- before I start with Movable Type. I could've removed Apache, done some cleanup and gone from there, but since I didn't have much "invested" in the install, I wiped the drive and started over.

Vía: LinuxHispano La próxima versión de Debian GNU/Linux, de nombre código "Lenny", llevará el número 5.0. Así lo anunció ayer Marc Brockschmidt, que además se refirió a la posibilidad de que ésta incluya también KDE4: "Puede haber una posibilidad para incluir a KDE4 en Lenny. Los esfuerzons en KDE 4.1 han sido muy prometedores y parecen estar conduciendo a un escritorio que puede reemplazar completamente a KDE3. En el caso de que KDE 4.1 esté disponible a tiempo, y que no tenga grandes problemas, subirlo a unstable para incluirlo en Lenny es una posiblidad". Así, el desarrollo de Debian GNU/Linux 5.0 avanza firmemente hacia su versión definitiva, planeada para este mes de Septiembre del 2008, incluso antes de lo que se esperaba originalmente.Artículo completo

This completely revamped edition covers the familiar Linux flavors as well as some exciting new distributions-Ubuntu, Mepis, Arch Linux, and four others Ideal for users planning the transition to Linux who want to sample different distributions to see which one best meets their needs Includes new sections on practical uses for Linux, cool multimedia apps, instant messaging, BitTorrent, and improved security techniques Valuable information for system administrators who need to set up secure, fully functioning Linux servers Bonus DVD is the only one on the market to include ten Linux distributions readers can try Read More... planet ebooks

Per chi non lo sapesse, Debian Etch non ha il supporto a ntfs-3g, quindi vi occorrera installare il pacchetto per Lenny qualora lo voleste utilizzare. In alternativa potreste sempre fare un bel "apt-get dist-upgrade" dopo aver sostituito le voci "etch" con la voce "lenny" nel vostro /etc/apt/sources.list per passare a Lenny con [...]

Mi amigo forat creo unos tutoriales para que podamos crear nuestro propio servidor web con Debian GNU/Linux, con esto podemos tener nustro propio blog sin censura alguna, solo tienes que seguir 14 tutoriales que explican detalle a detalle como crear tu servidor web Enalce: Como montar un servidor Web con Debian GNU/Linux Fuente: Como montar un servidor Web con Debian GNU/Linux

Dia 31 de março termina o suporte do Debian 3.1 “Sarge”, após o dia 31 ele não receberá mais atualizações de segurança, ficando apenas o suporte da versão atual, Debian 4.0 “Etch”, mais detalhes em Debian News.

Buenas noticias para los Debianeros, pero primero un anuncio. La próxima version estable de Debian, llamada Lenny, que se espera que tal vez este lista para fin de año; sera la version 5.0 de esta dsitribución Linux. Y la buena noticia tiene que ver con que existe una posibilidad, al menos pequeña, de que Debian 5.0 [...]

Buenas noticias para los Debianeros, pero primero un anuncio. La próxima version estable de Debian, llamada Lenny, que se espera que tal vez este lista para fin de año; sera la version 5.0 de esta dsitribución Linux. Y la buena noticia tiene que ver con que existe una posibilidad, al menos pequeña, de que Debian 5.0 [...]

Un año después del lanzamiento de Debian GNU/Linux 4.0 "Etch" y casi 3 años después de su lanzamiento original, el proyecto Debian terminará definitivamente el soporte de actualizaciones de seguridad para Debian GNU/Linux 3.1 "Sarge" el próximo 31 de Marzo. El proyecto está orgulloso de haber soportado por tanto tiempo una versión de su distribución y de haber dado a sus usuarios 1 año de plazo para actualizarse a la actual versión estable "Etch". Artículo completo en Debian News.

Mi è capitato ultimamente di avere problemi nella riproduzione di file video con Debian. Essi apparivano scurissimi ed era impossibile riuscire anche solo a distinguere le scene con colori freddi. Il problema sembrava di non facile soluzione ma effettuando varie ricerche in rete mi sono reso conto che invece la soluzione era molto più che facile, anche se la causa mi appare ancora inesplicabile.

Mi è capitato ultimamente di avere problemi nella riproduzione di file video con Debian. Essi apparivano scurissimi ed era impossibile riuscire anche solo a distinguere le scene con colori freddi. Il problema sembrava di non facile soluzione ma effettuando varie ricerche in rete mi sono reso conto che invece la soluzione era molto più che facile, anche se la causa mi appare ancora inesplicabile.

Mi è capitato ultimamente di avere problemi nella riproduzione di file video con Debian. Essi apparivano scurissimi ed era impossibile riuscire anche solo a distinguere le scene con colori freddi. Il problema sembrava di non facile soluzione ma effettuando varie ricerche in rete mi sono reso conto che invece la soluzione era molto più che facile, anche se la causa mi appare ancora inesplicabile.

Bones! Avui m'he agafat una estona per a empaquetar el FRIKIBloc, de ben segur que hi ha alguna errada a l'empaquetat, ja que m'ha obligat a canviar porcions de codi. Sí teniu 10 minuts per fer una prova n'estaré agraït. El podeu descarregar d'aquí: frikibloc_LAST_all.deb. La instal·lació permet configurar múltiples blocs. Per a crear-los, simplement executam com a root: # /usr/share/doc/frikibloc/debian/crea_frikibloc.sh USUARI CLAU DOMINI.CAT Això crea la configuració necessària: base de dades i apache (bàsicament). Tan sols falta entrar a la zona d'administració: Ja direu que tal ^_^ PD: He editat l'enllaç per a que apunti a la darrera versió. Aquí podeu trobar les altres.0 Comentaris

Este exploit afecta al Kernel Linux versión 2.6 de Ubuntu y Debian, el exploit es necesario ejecutarlo como usuario local, para así obtener identidad de root. Los Kernel Linux afectados son desde la versión 2.6.17 hasta 2.6.24. Por el momento para solucionar el problema de seguridad, habría que compilar nuestro propio kernel eliminando vmsplice. Pruebas hechas en Ubuntu apuntan a que funciona

Este exploit afecta al Kernel Linux versi??n 2.6 de Ubuntu y Debian, el exploit es necesario ejecutarlo como usuario local, para as?? obtener identidad de root. Los Kernel Linux afectados son desde la versi??n 2.6.17 hasta 2.6.24. Por el momento para solucionar el problema de seguridad, habr??a que compilar nuestro propio kernel eliminando vmsplice. Pruebas hechas en Ubuntu apuntan a que funciona

Este exploit afecta al Kernel Linux versión 2.6 de Ubuntu y Debian, el exploit es necesario ejecutarlo como usuario local, para así obtener identidad de root. Los Kernel Linux afectados son desde la versión 2.6.17 hasta 2.6.24. Por el momento para solucionar el problema de seguridad, habría que compilar nuestro propio kernel eliminando vmsplice. Pruebas hechas en [...]

Ubuntu seems to be the latest, greatest thing in the world of operating systems. The creators of Ubuntu have done some good things in terms of making Linux easier to use. But with newbs you bring ignorance, and there are a couple things I’ve been seeing that are kind of ridiculous - especially with regard to Debian, Ubuntu's parent.

Luego de varios dias sin postear, estudio y otras cosas personales... espero sepan entender! aqui les dejo algo que he leido y me super interesa:Las "guerras de distribuciones" son un clásico de la comunidad de software libre, y suelen originar interminables flames en listas de correo. Dejando de lado los fanatismos por una u otra distribución, las comparaciones entre ellas son útiles para quienes tienen que elegir una distribución para instalar en su equipo.En mi opinión, no existe una distribución que sea mejor que otra en todos los casos, sino que cuál es la mejor distribución en cada caso depende de las necesidades y preferencias personales.En cuanto a lo estrictamente técnico, algunas características destacables de Debian son:* Su alto nivel de confiabilidad, estabilidad y estandarización.* Excelente documentación. Muy completa.* Posee un poderoso sistema de actualización de paquetes que es muy fácil de usar (apt-get).* El repositorio de paquetes de Debian es pos

I created a new Debian LAMP VirtualBox .vdi image, and have uploaded it to VirtLinux via sshfs with the VBoxManage clonevdi tool. This method should preserve file system and partition integrity on the .vdi. Debian LAMP is available at VirtLinux on the Specialty page. http://www.virtlinux.com/specialty.html

Para instalar dotLRN, necesitamos tener aolserver y postgresql instalados. Para hacerlo utilizaremos apt-get install AOLServer4.0 y librerías # apt-get install aolserver4 aolserver4-nspostgres aolserver4-nssha1 aolserver4-nsxml aolserver4-nsopenssl aolserver4-nscache aolserver4-dev # apt-get install tdom htmldoc tcllib # update-rc.d -f aolserver4 remove # /etc/init.d/aolserver4 stop Postgresql 8.1 leer más

VirtualBox es el competidor de qemu , vmware , xen, parallels,... , el cual ademas se distribuye gratuitamente al usuario final bajo licencia GPL (la version opensource; los binarios estan sujetos a ciertas restricciones) 1- Instalacion2- Añadir vboxguestadditions3- Combinaciones de teclas4- Añadir directorio compartido5- Networking (en proceso de elaboracion)6- Añadir dispositvos USB Instalacion Para descargarlo , solo hay que bajarse el paquete .deb correspondiente a nuestra distribucion desde: http://www.virtualbox.org/wiki/Downloads Luego lo instalamos con un : $ sudo dpkg -i nombredelpaquete.deb Yo en edgy no he tenido ningun problema de dependencias pero si te encuentras con alguno , prueba con las siguientes dependencias: libqt3-mt libxalan110 libxerces27 Si todo se ha instalado perfectamente, solo nos queda añadir nuestro usuario de linux al grupo de usuarios de virtualbox: $ sudo usermod -G vboxusers -a nombre_de_usuario # despues de esto hay que desloguearse y volver a

One of the drawbacks to installing NVIDIA Proprietary drivers in Linux is that when the kernel is updated, you have to reinstall (recompile) the software to match the new kernel. This tutorial explains how to upgrade Proprietary NVIDIA video card drivers after your Debian Lenny Linux system has been upgraded to a new kernel version. [...]

To install type: sudo apt-get install libapache2-mod-cband Then add the following to your apache2.conf file: LoadModule cband_module /usr/lib/apache2/modules/mod_cband.so On Fedora there is modules folder link in the /etc/httpd configuration folder. This blog post details configuring a virtualhost with cband throttling: http://www.bgevolution.com/blog/index.php/apache-mod-cband/

Looking to build your own Debian Linux Mirror? Use your local hard drive or a network drive and share your mirror over a network or even on the internet. Having your our own Debian/Ubuntu Linux Mirror enables you to drastically speed up the process of installing packages or complete netbuilds on your single or [...]

De la mano de la compañía germana Manufactum llega este mini ordenador basado en Debian Linux (la distribución más prestigiosa). Pequeño y potente, estás ante el futuro rey de los carputers» ver notaTechnorati: debian+linux manuscriptum manufactum carputers kde ordenadores+con+linux linux+preinstalado firefox openoffice.orgBlogalaxia: debian+linux manuscriptum manufactum carputers kde ordenadores+con+linux linux+preinstalado firefox openoffice.org

Siguiendo con la instalación del servidor Debian 4 en un Compaq Proliant DL 360 que empezamos en el anterior artículo, esta vez toca instalar un Tomcat para que acepte las conexiones desde un Apache. Para ello debemos tener instalado un Apache (ver el anterior artículo) y realizar los pasos que se describen aquí, que consiste en instalar el JDK de Java, instalar Tomcat 5.5 e instalar el módulo conector mod_jk. Instalar Java JDK 1.- Bajar JDK 6 Update 3 - Ir a http://java.sun.com/javase/downloads/index.jsp - Pinchar en JDK 6 Update 3 - Pinchar en Linux Platform > Linux self-extracting file (jdk-6u3-linux-i586.bin) Guardamos el archivo bajado en en /root/tmp/ 2.- Crear directorio para java $ mkdir /usr/java 3.- Mover JDK al directorio creado $ mv /root/tmp/*.bin /usr/java 4.- Establecer derechos de ejecución $ chmod a+x /usr/java/*.bin 5.- Ejecutarlo $ /usr/java/jdk-6u3-linux-i586.bin Aceptar licencia? yes A continuación él mismo desempaqueta e instala 6.- Añadir variables de e

Siguiendo con la instalación del servidor Debian 4 en un Compaq Proliant DL 360 que empezamos en el anterior artículo, esta vez toca instalar un Tomcat para que acepte las conexiones desde un Apache. Para ello debemos tener instalado un Apache (ver el anterior artículo) y realizar los pasos que se describen aquí, que consiste en instalar el JDK de Java, instalar Tomcat 5.5 e instalar el módulo conector mod_jk. Instalar Java JDK 1.- Bajar JDK 6 Update 3 - Ir a http://java.sun.com/javase/downloads/index.jsp - Pinchar en JDK 6 Update 3 - Pinchar en Linux Platform > Linux self-extracting file (jdk-6u3-linux-i586.bin) Guardamos el archivo bajado en en /root/tmp/ 2.- Crear directorio para java $ mkdir /usr/java 3.- Mover JDK al directorio creado $ mv /root/tmp/*.bin /usr/java 4.- Establecer derechos de ejecución $ chmod a+x /usr/java/*.bin 5.- Ejecutarlo $ /usr/java/jdk-6u3-linux-i586.bin Aceptar licencia? yes A continuación él mismo desempaqueta e instala 6.- Añadir variables de e

The following tutorial covers the process of installing Compiz Fusion on Debian Lenny. Compiz is the original compositing window manager. By using 3D graphics acceleration via OpenGL to render, Compiz provided intense immersing graphical effects on Gnome and KDE desktop environments. The Beryl window manager was a fork of Compiz and [...]

E si finalmnte anche debian si è decisa a rilasciare una distro live con KDE 4, i primi a a rilasciare la KDE 4 Live furuno proprio quelli di Suse ed ora per chi non amasse una live basata propio su quest’ ultima potrà avvalersi di quella rilasciata dal team di Debian. Questa live che per il momento non ha un vero e proprio nome sarà disponibile sia per architetture i386 che per amd64. Non vi resta che scaricarla Download Mirror:  i386, amd64 Download Torrent: i386, amd64

Since very early on in my professional career I have been afforded the luxury of running Linux exclusively on my own hardware, and most of my administration experience and programming work has been primarily done with Linux or Unix like operating systems. Having dabbled in maybe a dozen or so systems, and supporting several as a part of work duties, I just really like the way Linux runs. My Linux work environment is fine tuned to the Nth degree of precision, though it does take the occasional fiddling to keep all the ants marching in the same direction. These days I have settled into a happy symbiosis with Debian unstable. Possibly because I am a micro-managing control freak, or possibly because I am the kind of person who finds patching, configuration, and compiling a new kernel fun, I keep apt away from the kernel bits and build my own from kernel.org source.

Vyatta (pronounced vee-AH-tah.) today announced the latest release of its open-source networking software.The Vyatta software combines router, firewall, and VPN capabilities into an integrated solution that delivers twice the performance of proprietary network solutions at half the price.The latest release, Vyatta Community Edition 3 (VC3) provides substantial enhancements and feature additions from the previous VC2 release, including IPSec VPN, multi-link PPP, and BGP scaling and security."I’m a firm believer in the value of open source over proprietary technologies. If you’re looking for price-performance—which I have to do for the taxpayers—you can’t beat Vyatta," said Paul Wheeler, IT manager for the City of Madera. "I have been continually impressed with Vyatta’s attention to detail, excellent support, and ability to reliably add more power and flexibility to the solution. Vyatta is no longer just a lower-cost alternative to high-priced Cisco proprietary routers. It’

He tenido la oportunidad de realizar una instalación de Debian 4 en un Compaq Proliant DL 360, el primero de estas características dónde instalo un Linux. La necesidad es la de tener un servidor Apache+Tomcat conectándose a una base de datos externa Oracle, además de funcionar como servidor CVS. En éste artículo voy a describir los pasos para tener el servidor funcionando con Debian, como anticipación a siguientes artículos de la puesta en marcha de los servicios descritos. Necesitamos: CD de instalación “netinst” de Debian 4 Etch Acceso físico al ordenador, y una consola conectada (teclado y pantalla) Datos relevantes de Hardware: 2xPentium III 1,4GHz / Bus 133MHz / Cache 512K 2 GB RAM Smart Array 5i Controler (2x 36 GB RAID 1) 2 NICs, CD, USBs Se intentó instalar mediante el conjunto de DVDs via una grabadora externa USB, pero la primera imagen parecía estar dañada. Se procedió a instalar mediante el CD NetInst. Pasos para la instalación 0.- Asegurars

He tenido la oportunidad de realizar una instalación de Debian 4 en un Compaq Proliant DL 360, el primero de estas características dónde instalo un Linux. La necesidad es la de tener un servidor Apache+Tomcat conectándose a una base de datos externa Oracle, además de funcionar como servidor CVS. En éste artículo voy a describir los pasos para tener el servidor funcionando con Debian, como anticipación a siguientes artículos de la puesta en marcha de los servicios descritos. Necesitamos: CD de instalación "netinst" de Debian 4 Etch Acceso físico al ordenador, y una consola conectada (teclado y pantalla) Datos relevantes de Hardware: 2xPentium III 1,4GHz / Bus 133MHz / Cache 512K 2 GB RAM Smart Array 5i Controler (2x 36 GB RAID 1) 2 NICs, CD, USBs Se intentó instalar mediante el conjunto de DVDs via una grabadora externa USB, pero la primera imagen parecía estar dañada. Se procedió a instalar mediante el CD NetInst. Pasos para la instalación 0.- Asegurarse que la má

     I’m writing this tutorial to help other that may have the same problem I had. Let me explain to you: I have a Debian server called debian1 which has external ip 1.1.1.1 on eth0 and a local ip 192.168.1.1 on eth0:1, and a second Debian server called debian2 which only has 192.168.1.2 local ip on eth0. I need to access debian2 with ssh from the internet. I cant do that directly because debian2 does not have an external ip address to connect to the internet. But we can use a port forwarding rule on debian1 so that I can access debian2 trough debian1 on a specific port. The only command you have to use is:   iptables -A PREROUTING -t nat -p tcp -i eth0 –dport 88 -j DNAT –to 192.168.1.2:22 after entering this command debian1 will forward any request on port 88 from eth0 to 192.168.1.2 on port 22. Now all I have to do is to enter 1.1.1.1 port 88 in putty and I can log-in to debian2 trough ssh. That’s it short and simple about port forwarding.

Installing Compiz in Debian is a relatively simple process. What is Compiz? Compiz is an advanced compositing window manager that uses 3D Graphics acceleration to produce neat graphical desktop effects. Originally succeeded by Beryl (a fork of Compiz), Berl has since merged back with Compiz and both efforts are now one. If you have [...]

     This is an update to a previous post regarding the change of mac address in Debian. In the previous tutorial I told you can change it by ifconfig from a root account. Now I’m going to teach you how to set an interface mac address using /etc/network/interfaces . This is a better way to set your mac address because the mac you set in /etc/network/interfaces will always load when the interfaces are loaded so you don’t have to worry about the mac after reboot for example. Let’s start by looking at my /etc/network/interfaces it looks like this:   #This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 1.1.1.2 netmask 255.255.255.0 network 1.1.1.255 broadcast 1.1.1.255 gateway 1.1.1.1 dns-nameservers 1.1.1.1 dns-search .com hwaddress ether 00:01:04:1

The following tutorial covers the process of installing the Proprietary NVIDIA video card drivers from the Nvidia Website into your Debian Lenny Linux system. We have known a lot of people who have had some issues trying to get the NVIDIA drivers to install and work with Lenny, so we decided to write this tutorial [...]

Today, Finnix 0.90, a Debian-based mini live CD designed for system administrators, has released.As we said, Finnix is a small, self-contained, bootable Linux CD distribution for system administrators, based on Debian GNU/Linux. You can use it to mount and manipulate hard drives and partitions, monitor networks, rebuild boot records, install other operating systems, and much more."Finnix 90.0 has been released for the x86/AMD64, PowerPC, and UML/Xen platforms. Finnix is a small, self-contained, bootable Linux CD distribution for system administrators, based on Debian testing. Finnix 90.0 includes a new Linux kernel, faster booting, and the ability to boot from SATA CD-ROM and DVD-ROM devices, as well as updated Debian system software and bug fixes. After much delay, Finnix 90.0 includes Linux 2.6.22; it includes support for both Unionfs 2 and Aufs, with Unionfs as the default for stability reasons. Finnix 90.0 will now boot even quicker, about 8 seconds quicker than Finnix 89.0!"Downlo

The following tutorial is for Debian or Ubuntu users who are looking to install proprietary drivers for their ATI or Nvidia video card. Installation of proprietary ATI or Nvidia video card drivers will allow you to take full advantage of all the 3d capabilities your Video card may have to offer. In this tutorial, [...]

The following tutorial covers the process of changing the default Debian Menu Icon to a custom Icon and in addition change the Debian Menu name. This is for those of us that prefer to use a pure Debian Linux Operating environment or a remix that is based on Debian such as pendrivelinux. This process was [...]

Voraussetzungen Office 2007 greift um sich! Immer öfters begegnet man den docx Dateien im OpenXML Format. Die vorgestellte Lösung erlaubt das Öffnen und Ansehen dieser Dateien in OpenOffice. Ob sie allerdings echt Layouttreu sind, habe ich nicht gecheckt. Damit es läuft sollte ein OpenOffice > 2.0 installiert sein → bei mir hats mit 2.2.1 gefunzt. Vorgehen Download des OpenOffice OpenXML Translator - RPM’s von Novell. Im Verzeichnis drin das RPM entpacken (Dateinamen bitte anpassen): rpm2cpio odf-converter-1.0.0-5.i586.rpm | cpio -iv --make-directories OpenOffice schliessen und die entsprechenden Erweiterungen ins richtige Verzeichnis kopieren: cp -r usr/lib/ooo-2.0/* /usr/lib/openoffice/ Die Doku kopieren: cp -r usr/share/doc/packages/odf-converter /usr/share/doc/ Mime-XML kopieren: cp usr/share/mime/packages/odf-converter.xml  /usr/share/mime/packages/ Mime-Datenbank updaten: update-mime-database /usr/share/mime KDE3 Mime: cp opt/kde3/shar

     It could happen to anyone to have problems with date and time. For example I had a problem a few day’s ago with an older server of mine which has problems with hardware time, it resets everytime I disconnect it from power. Its something to do with the motherboard I changed the battery but that didn’t solved the problem. That’s why sometimes I need to correct its date with the following method:   date –set 2007-10-15 to set yyyy-mm-dd date –set 16:47:30 to set hh-mm-ss hwclock –systohc to sync hardware clock to what we introduced earlier     At least from Debian version 2.2 onwards, the system automatically saves the system time to hardware clock on shutdown, and sets the system clock from hardware clock when Debian boots up. This is done in the script /etc/init.d/hwclock.sh.     Another thing you might ran into is changing the timezone. If the timezone is not set or is wrong, log in as superuser and run tzconfig to configure the timezone

     In this tutorial I’m going to teach you how to install SNMP on Debian and configure it for local or remote use. Simple Network Management Protocol is a widely used protocol for monitoring the health and welfare of network equipment, computer equipment and even devices like UPS’s. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. In my case I’m using snmp to monitor the status of my servers, both linux and windows. I use Cacti to graph all this information. (I will cover cacti installation on Debian in a future post). For the method described below I’m using apt for installing snmp, so before you start this you should configure apt and add some http or ftp sources into your /etc/apt/sources.list or if you have your installation dvd/cd you can use that. Let’s get started: We need to install snmpd package using the following command: apt-get install snmpd     That’s it snmpd is installed, now we

Echando un vistazo un sábado cualquiera aburrido, antes de salir a cenar por ahí, me he encontrado con una aberración, que seguro hará que algún debianero, se retuerza en su silla.A través de Digg, me encuentro con una curiosa comparativa en la página PolishLinux (que no en la web de Microsoft), en la que hacen una comparación, técnica y estética entre 2 distribuciones de Linux: Ubuntu y Debian.Sin meterme ya en los detalles técnicos, de los cuales podría discrepar un poco, mi sorpresa llega cuando me fijo en las capturas de pantalla que han puesto, digamos, para diferenciarlas estéticamente:Quizá a simple vista, no os prezca más que un Ubuntu, escasamente retocado, con fondo y bordes de ventanas azul y un Debian aparentemente más elaborado, de color negro, con un buen fondo de pantalla.. Bien, pues veamos más de cerca, ese "fabuloso" Debian:No se si con afán de dejar mal a Ubuntu o todo lo contrario, han puesto una captura que hará que más de un usuario de Debian

    A list of common commands is very useful when new to Debian, to teach you how to handle/manage files and systems.I extracted from Debian’s User Reference Manual the most often used commands : Commands for reading documentation: man [section-number] subject man shows the manual page on the command (use q or ctrl-C to get out of it if it doesn’t terminate at the end of the text) This command is crucial for helping you learn how to use it and other Linux commands   info [subject] A lot of Debian Linux documentation is provided in info format. This is similar to a hypertext format, in that you can jump to other sections of the documentation by following links embedded in the text. help [subject] Use help for on-line help about bash’s built-in commands. Help by itself prints a list of subjects for which you can ask for help. Commands for basic file-handling: If you are gonna use linux as operating system you have to know this commands: pwd Show the cur

    Although the physical MAC address is permanent by design and is assigned to your network card by factory several mechanisms allow the modification, or spoofing of the MAC address that is reported by the operating system. This can be useful if you want to keep your privacy or to ensure interoperability. Some internet service providers bind their service to a specific MAC address; if you change your network card or intend to install a router the service won’t work anymore. Changing the MAC address of the new interface will solve the problem.     Under Linux the MAC address of a network card can be changed by doing the following under a root account. /etc/init.d/networking stop ifconfig eth0 hw ether 02:01:02:03:04:08 /etc/init.d/networking start ” 02:01:02:03:04:08” being the new assigned mac.     Under Fedora Core 5, and possibly in other Linux distributions, to disable and restart networking, you must stop and start /etc/init.d/network, instead of /etc/init.d/network

Upgrade von 1.7 auf 1.10 Um die installierte Version zu checken kann folgende Spezialseite aufgerufen werden: http://wiki.yourhost.ch/mediawiki/index.php/Spezial:Version. Zuerst muss man mal upgraden und das Baby installieren: apt-get update apt-get install mediawiki mediawiki1.10 Danach sollte man zu folgenden Dateien kommen: LocalSettings.php Ist bei Version 1.7 an einem anderen Ort: cp /var/lib/mediawiki1.7/LocalSettings.php /etc/mediawiki1.10/ Eventuell muss in der Datei das Verzeichnis angepasst werden. AdminSettings.php Hat bei mir noch nicht existiert: cp /usr/share/doc/mediawiki1.10/examples/AdminSettings.sample /etc/mediawiki1.10/AdminSettings.php Und danach die Datei editieren und Usernamen/Passwort setzen. Verzeichnisse: extensions und images Gibt es bei uns nicht… Sie werden sich aber höchstwahrscheinlich im Verzeichnis /var/lib/mediawiki1.7 befinden und müssen unter Umständen in /var/lib/mediawiki1.10 kopiert werden. apache.conf /etc/mediawiki1.7/apac

Ieri sono stato per la prima volta al Debian Café, situato a Torino in via Vanchiglia 25.Lo si scorge già da qualche metro di distanza grazie alla presenza di una piccola insegna che riporta lo swirl rosso di Debian su sfondo nero.Il locale è molto carino, semplice e sobrio e al contempo curato.La prima cosa che si nota addentrandosi un po' nella sala sono alcune immagini appese alle pareti che risultano subito alquanto familiari a chi, come me, segue il software libero. Per fare un esempio, ci sono una foto di Richard Stallman, una rappresentazione del piedino di Gnome, ecc...Salta anche all'occhio la console con cui il DJ fa musica, circondata dai loghi delle Creative Commons e del formato audio libero OGG Vorbis.Il locale, oltre alla sala bar, dispone inoltre di altre due ampie sale, una per conferenze, lezioni su GNU/Linux, feste di laurea, ecc..., e una per i concerti.Ultime due chicche: la prima è che il locale fornisce una connessione wireless ad Internet gratuita (quindi

Ubuntu/Debian LAMP Server เมื่อคืนคุยกับเพื่อนถึงตีสามเรื่อง dmoz ทำไงจะเอา db มันมาลงเว็บเราได้คุยไปคุยมาได้คำตอบที่หลากหลายวิธีได้ ผมเลยมาอธิบายให้เพื่อนอีกคนฟังแต่พอดีเพื่อนดันมีของดีกว่าที่ผมอธิบายซ่ะอีก เลยต้องลองของซ่ะลอง ตัวเองก็มี server อยู่ตั้งสองตัวแต่ใช้ไม่ได้เพราะกลัวเอามาทดสอบเดี๋ยวเว็บคนอื่นๆเข้าไม่ได้เลยคิดออกว่าจะหาที่ไหน เลยโทรไปถามน้อง น้องมันก็

This document describes the steps required to install squid proxy server from http://squid-cache.org and webmin from http://webmin.com on a debian 4.0 system as well as basic steps required to configure squid to listen on multiple ip addresses and use them as outgoing source address for connections. This will also show you how to configure squid from webmin to accept connections only from predefined clients based on the client's ip address. For the steps presented below root access over ssh on the server or physical ( console ) access will be required. Squid installation Installing squid on a debian system is straight forward. The administrator must be logged in as root and just type: apt-get install squid. This will install squid along with all required dependencies (it may ask for the user permission to install, in that case just approve ). Webmin installation download the webmin .deb package from http://webmin.com/download.html and upload it on your server, then type: dpkg

I installed Debian Etch in my system a few weeks back and it is a really good distro specially for those without an internet connection at home since all the basic packages are included in the 3dvds of the distro.One problem i encountered after the installation is that i after configuring the network i cannot access the internet even though the IP Address, Gateway and DNS is correct when compared to the other operating systems and the command route -n shows no entry in the ip table.At first i thought that it was just my internet connection which has this problem but later after checking out various forums and IRC i realised that many people faced this problem..There is an easy solution to solve this problem, i.e by manually entering the default gateway and then entering the default host for the device eth0(nic).This is done using the following commands one after another :$route add default gw [ ip address obtained using dhcp ]$route add default gw [ gateway address obtained using dhc

VirtualBox works on both distributions flawlessly. Although I have observed faster, and less memory intensive, performance on Ubuntu. It may be the result of Ubuntu utilizing a more recent Kernel, but none the less given rates of Linux progress, I would expect the next version of Debian to be simply jaw dropping. I guess the [...]

Step by step of installasi apache2 and php4:1. installasi apache2 - # apt-get install apache2 - # apt-get install apache2-mpm-prefork - afterwards typing http://iptemen2/ [at] web browser of darling temen2 to try whether apache2 which terinstal have walked better2. installasi php4 - deb http://packages.dotdeb.org stable all - deb-src http://packages.dotdeb.org stable all ( enhancing at your source.list) - # apt-get install libapache2-mod-php4 php4-cgi php4-curl php4-domxml php4-gd php4-gmp php4-imap php4-ldap php4-mcal php4-mcrypt php4-mhash php4-ming php4- mysql php4-odbc php4-pspell php4-recode php4-snmp php4-xslt php4-xdebug curl libwww-perl imagemagick - later,then edit the file apache2.conf [in] / etc/apache2/apche2.conf, eliminating sign # in the early word of Addtype aplication / x-httpd-php . php and Addtype aplication / x-httpd-php-source . phps and enhance the Addhandler php-script . php4. - try whether apache2 and php4 have ambula

Le projet Debian annonce la première mise à jour de sa distribution stable Debian GNU / Linux surnommée Etch, sortie en avril dernier.Après une très longue attente et de multiples reports successifs, la distribution Linux non commerciale Debian a été livrée début avril dans une mouture estampillée 4.0 autrement appelée Etch. Cette distribution sur laquelle se [...]

The Debian project last week issued fixes for the stable Debian GNU/Linux 4.0, codenamed Etch. The update mainly adds corrections for security problems to the stable release, along with a few adjustment to serious problems. The first update also corrects a few important issues that have been noticed too late in the release process, the team said in an emailed announcement. The update includes

Debian lanza un parche para corregir un problema de desborde en xpdf que puede permitir la ejecución de código malicioso en un PDF. Ya que koffice incluye una copia de xpdf, la distribución de seguridad incluye el parche apropiado. La distribución estable se ha corregido en la versión 1.6.1-2etch1 y la versión de desarrolladores contiene la corrección en 1.6.3-2. Compártelo

  C’era di mezzo il compleanno di Debian, (16 agosto) nonostante questo il team di sviluppo di Debian ha deciso ugualmente di rilasciare la prima revisione di Etch, che racchiude solamente correzioni e problemi sorti solamente da maggio. Per poter avere Etch r1 bisognerà avere nella propria sourcelist il reposity security e inoltre si dovrà eseguire aptitude update & aptitude upgrade come super utente (root).

En estos últimos dias se produjo la actualización oficial de la distribución Debian 4 pasándose a llamar Debian 4.0r1 Etch. Además de una lista de actualizaciones, actualizaciones de seguridad, correcciones de errores, el 4.0r1 Etch traerá el Kernel ABI 2.6.18-5 (linux-image-2.6.18-5-686). Aquellos que tengan esta Debian instalada pueden actualizarla a través de cualquier mirror de la misma. En http://www.debian.org/mirror/list se encuentra la lista de mirrors. Enlace: Debian

Well, Debian turned 14 on the 16th of August. That takes some thinking about. Although the number of Linux users has increased greatly in the past few years, it’s easy to forget how old the technology actually is (in relative terms). The Linux kernel we so love was Linus Torvald’s brainchild and has it’s own birthday on 17 September when it turns sweet 16. Take a look at the original announcement of the release of Debian, dated 16th August 1993: Original Announcement. Do you know how Debian was named? Well, the founder, Ian Murdock, combined the first name of his girlfriend, Deborah, with his own - hence, Debian. That also tells us how to pronounce Debian - I have heard many variants with ‘Deeebian’ being the most popular but take the two names and there you have it: Deb(orah)Ian. I wonder if there has been any release that has been as influential in the wider Linux community as Debian has proven to be. Possibly Redhat? Either way, Debian has been forked

Well, Debian turned 14 on the 16th of August. That takes some thinking about. Although the number of Linux users has increased greatly in the past few years, it’s easy to forget how old the technology actually is (in relative terms). The Linux kernel we so love was Linus Torvald’s brainchild and has it’s own birthday on 17 September when it turns sweet 16. Take a look at the original announcement of the release of Debian, dated 16th August 1993: Original Announcement. Do you know how Debian was named? Well, the founder, Ian Murdock, combined the first name of his girlfriend, Deborah, with his own - hence, Debian. That also tells us how to pronounce Debian - I have heard many variants with ‘Deeebian’ being the most popular but take the two names and there you have it: Deb(orah)Ian. I wonder if there has been any release that has been as influential in the wider Linux community as Debian has proven to be. Possibly Redhat? Either way, Debian has been forked

I had a good day today. I always looked around for good monitoring software and I strongly believe that I have just found it. It holds great name - Zabbix. Zabbix is a solution for monitoring applications, networks, and servers. With Zabbix, you can monitor multiple servers at a time, using a Zabbix server that comes with a web interface (that is used to configure Zabbix and holds the graphs of your systems) and Zabbix agents that are installed on the systems to be monitored. The Zabbix agents deliver the desired data to the Zabbix server. I will try to write simple tutorial about how to install this excellent peace of software on any debian based linux - in my case I have successfully installed in on my Sidux box. I do not want to waste your time, so lets look how to do it. You do not necessary need any special experience, just your installed favorite debian based linux distribution. (more…)

Today I wanted to try something different and because a friend of mine has asked me to sort his windows so he will be able to connect from his laptop to his PC remotely, I wanted to do the same in linux. Under windows (XP) it is quite easy, just check allow remote connections in my computer properties and off you go. So how does linux compare? I would say, it is almost the same. First you need to make sure you have krfb installed. Let me explain: KDE Desktop Sharing, also known as krfb, is a service based on the RFB protocol, that allows you to share your desktop with other users. For example, you can show your desktop to an administrator to fix problems on your computer. You have the full control of access to your desktop; nobody can see it without your explicit permission. KDE Desktop Sharing is compatible with all regular VNC / RFB clients, including vncviewer. (more…)

Here’s a simple guide to using your existing Windows install inside Debian or Ubuntu - and still being able to start it from your hard disk if you need. Unlike previous guides, it takes around 15 minutes and doesn’t require any terminal use. Updated: For some reason System → Administration → Users and Groups seems to be buggy on some installs. Alternative instructions are now included below. In Windows First make a hardware profile for VMware: Click Start → Control Panel → System On the Hardware tab, select Hardware Profiles Click Copy, and call your new hardware profile VMware. (more…)

Se ha detectado vulnerabilidades críticas en el navegador iceweasel de Debian. Los sistemas comprometidos son: Debian GNU/Linux 3.1, Debian GNU/Linux 4.0 y Debian GNU/Linux unstable alias sid El navegador es sensible a ataques spoofing, que puede hacer que un hacker pueda hacerse con los privilegios de administrador y de esta manera con el control de la máquina. Para más información y descarga de actualizaciones: http://www.debian.org/security/2007/dsa-1308 Compártelo

Debian ha lanzado una actualización para el OpenOffice para solucionar una vulnerabilidad crítica, los sistemas afectaos son: Debian GNU/Linux 3.1, Debian GNU/Linux 4.0 y Debian GNU/Linux unstable alias sid. Para más información y descarga de los parches: http://www.us.debian.org/security/2007/dsa-1307 Compártelo

Debian ha lanzado una actualización de ipsec-tools, para solucionar algunas vulnerabilidades encontradas en la que se podía generar un DOS. La vulnerabilidad es causada por un error en src/racoon/isakmp_inf.c. Esto se puede explotar por ejemplo interrunpiendo los tuneles existentes de IPSec e introducir un paquete especial hecho a mano. Para más información y descarga de paquetes: http://www.debian.org/security/2007/dsa-1299 Compártelo

apt-get install. Установка пакетов и их обновлений. Воспользуйтесь командой apt-get install: # apt-get install tuxkart Установка пакета с перезаписью файлов: # apt-get install --reinstall tuxkart Чтобы установить сразу несколько программ, перечислите их, разделяя пробелами: # apt-get install tuxkart gltron frozen-bubble tuxracer nethack galaga Загрузка программ без установки или

Debian GNU/Linux 4.0 Το Debian Project είναι στην ευχάριστη θέση να ανακοινώσει την επίσημη διάθεση του Debian GNU/Linux έκδοση 4.0, με κωδική ονομασία etch, έπειτα από 21 μήνες συνεχούς ανάπτυξης. Το Debian GNU/Linux είναι ένα ελεύθερο λειτουργικό σύστημα που υποστηρίζει έντεκα διαφορετικές αρχιτεκτονικές επεξεργαστών και περιλαμβάνει τα περιβάλλοντα εργασίας KDE, GNOME και Xfce. Ακόμη,